Siyakwamukela kumawebhusayithi ethu!
English
IKHWALITHI LOKUSAKAZA LOBUCHWEPHESHE
IZICI EZIPHUMA ZOKUGULA
usebenzisa ukunemba okuphezulu kwe-screw drive
  • I-Shears MMS-1

    I-Shears MMS-1

    Incazelo emfushane:

    IZIMPAWU ZOMSHINI WONKE WOKUgunda Umshini wokugunda uwonke wonke unomsebenzi olula Ungaqeda ukugunda okulandelanayo, ukugunda kwe-arc, ngisho nokugunda umumo ngendlela engafanele.Ingakwazi ukusika izinsimbi zeshidi zibe yinoma yiziphi izinhlobo ngomsebenzi wezandla.Futhi ingaqhubeka nokusika i-rectilinear nokusika i-curvilinear.IMINININGWANE: Imodeli ye-MMS-1 MMS-2 MMS-3 MMS-4 QSM-3 Max.Ubukhulu bokugunda (mm) 1.5 ...

  • Izikebhe ze-QC11Y

    Izikebhe ze-QC11Y

    Incazelo emfushane:

    UMSHINI WOKUSIKA ISHIDI LASEHYDRAULIC 1. Isakhiwo sensimbi esakhiwe, esiqinile, esiqinile futhi esiqinile 2. Isistimu yokudlulisa i-hydraulic transmission, enokwethenjelwa okuhle 3. Igeji elingemuva lisebenzisa idivayisi ehlakaniphile yokubonisa idijithali, ubuningi be-shear bungabalwa ngokuzenzakalelayo, ibanga le-back gauge ingasethwa ngokuvumelana nezidingo zamakhasimende 4. ezihambayo orbit of the blade ...

  • I-Shears EBQ01-1.25X650

    I-Shears EBQ01-1.25X650

    Incazelo emfushane:

    EZIPHUMA I-handshear inokulawula unyawo nokusebenza okulula Ilethwe ngokukhanya okusebenzayo Ikhabhoni ephezulu ne-chrome steel blade Isetshenziselwa ukugunda ithusi lensimbi emnene, ipulasitiki ye-zinc yethusi futhi ihola umshini Wokugunda Unyawo Lwekhwalithi Ephakeme BQF01-1.0X1050,Imboni ye-TTMC, I-China Exporter, Ukuthengiswa okushisayo IZIMPAWU ZOBUCHWEPHESHE Imodeli BQF01-1.25X650 BQF01-1.0X1050 EBQ01-1.25X650 EBQ01-1.0X1050 ...

  • I-Shears MMS-2

    I-Shears MMS-2

    Incazelo emfushane:

    IZIMPAWU ZOMSHINI WONKE WOKUgunda Umshini wokugunda uwonke wonke unomsebenzi olula Ungaqeda ukugunda okulandelanayo, ukugunda kwe-arc, ngisho nokugunda umumo ngendlela engafanele.Ingakwazi ukusika izinsimbi zeshidi zibe yinoma yiziphi izinhlobo ngomsebenzi wezandla.Futhi ingaqhubeka nokusika i-rectilinear nokusika i-curvilinear.IMINININGWANE: Imodeli ye-MMS-1 MMS-2 MMS-3 MMS-4 QSM-3 Max.Ubukhulu bokugunda (mm) 1.5 ...

  • I-Shears QC-12K

    I-Shears QC-12K

    Incazelo emfushane:

    SWING BEAM SHEARING MACHINE Isakhiwo sonke somshini Wokugunda Idizayini yaseYurophu ngokuphelele, ebukeka kahle.Khipha ukugqwala nge-sand-blast futhi kuhlanganiswe ngopende ovimbela ukugqwala Amafreyimu, izindawo zokuhlanganisa kanye nezimbobo zokuxhuma kwenziwa ngomshini ngemva kwenqubo yokushisela, kufika ku-60' ngephasi eyodwa.I-1.Hydraulic system Adopt integrated hydraulic control system, enokwethenjelwa kakhudlwana futhi kulula ukuyilungisa.Hy...

  • I-Shears EBQ01-1.0X1050

    I-Shears EBQ01-1.0X1050

    Incazelo emfushane:

    EZIPHUMA I-handshear inokulawula unyawo nokusebenza okulula Ilethwe ngokukhanya okusebenzayo Ikhabhoni ephezulu ne-chrome steel blade Isetshenziselwa ukugunda ithusi lensimbi emnene, ipulasitiki ye-zinc yethusi futhi ihola umshini Wokugunda Unyawo Lwekhwalithi Ephakeme BQF01-1.0X1050,Imboni ye-TTMC, I-China Exporter, Ukuthengiswa okushisayo IZIMPAWU ZOBUCHWEPHESHE Imodeli BQF01-1.25X650 BQF01-1.0X1050 EBQ01-1.25X650 EBQ01-1.0X1050 ...

  • I-Shears MMS-3

    I-Shears MMS-3

    Incazelo emfushane:

    IZIMPAWU ZOMSHINI WONKE WOKUgunda Umshini wokugunda uwonke wonke unomsebenzi olula Ungaqeda ukugunda okulandelanayo, ukugunda kwe-arc, ngisho nokugunda umumo ngendlela engafanele.Ingakwazi ukusika izinsimbi zeshidi zibe yinoma yiziphi izinhlobo ngomsebenzi wezandla.Futhi ingaqhubeka nokusika i-rectilinear nokusika i-curvilinear.IMINININGWANE: Imodeli ye-MMS-1 MMS-2 MMS-3 MMS-4 QSM-3 Max.Ubukhulu bokugunda (mm) 1.5 ...

  • I-Shears QC-12Y

    I-Shears QC-12Y

    Incazelo emfushane:

    UMSHINI WOKUSHENZA UGOLISO WE-HYDRAULIC SWING BEAM Isakhiwo sonke somshini Wokugunda Umklamo waseYurophu ngokuphelele, ukubukeka okuhlelekile.Khipha ukugqwala nge-sand-blast futhi kuhlanganiswe ngopende ovimbela ukugqwala Amafreyimu, izindawo zokuhlanganisa kanye nezimbobo zokuxhuma kwenziwa ngomshini ngemva kwenqubo yokushisela, kufika ku-60' ngephasi eyodwa.I-1.Hydraulic system Adopt integrated hydraulic control system, enokwethenjelwa kakhudlwana futhi kulula ngokuyinhloko...

  • Shears HN-3

    Shears HN-3

    Incazelo emfushane:

    IZICI ZE-HAND NOTCHER 1.I-Heavy-duty blade 2.Insimbi ekhanyayo ukujiya okwengeziwe 3.Ubukhulu bomthamo ngu-3mm 4.Inotha yesandla i-HN-3/102 eyensimbi emaphakathi nepuleti INCAZELO: MODEL HN-3/102 HN-3 Umthamo (Ithani) 3 3 Ukuqina(mm) 1.5 1.5 Izibhakela(mm) 100X100 125x125 90° Angel(mm) 100X100 125x125 Ram stroke(mm) 30 25 NW/GW(kgs) 22/30 ... 2

  • I-Shears MMS-4

    I-Shears MMS-4

    Incazelo emfushane:

    IZIMPAWU ZOMSHINI WONKE WOKUgunda Umshini wokugunda uwonke wonke unomsebenzi olula Ungaqeda ukugunda okulandelanayo, ukugunda kwe-arc, ngisho nokugunda umumo ngendlela engafanele.Ingakwazi ukusika izinsimbi zeshidi zibe yinoma yiziphi izinhlobo ngomsebenzi wezandla.Futhi ingaqhubeka nokusika i-rectilinear nokusika i-curvilinear.IMINININGWANE: Imodeli ye-MMS-1 MMS-2 MMS-3 MMS-4 QSM-3 Max.Ubukhulu bokugunda (mm) 1.5 ...

  • Shears Q28B 4*200

    Shears Q28B 4*200

    Incazelo emfushane:

    I-CONNER NOTCH MACHINE EZIPHUMA: Imishini ekukhiqizweni kwebhokisi lensimbi eliyisikwele eline-shear angle, elula, enembile, esheshayo, uhlobo lomkhiqizo we-hydraulic, pneumatic and pedal, ifenisha yezokwelapha, yensimbi, ifenisha yehhovisi lensimbi, i-kitchenware, i-hardware nezinye izimboni zisebenza kakhulu. .Lo mshini usetshenziselwa ikakhulukazi ukusika izinto zensimbi nezingezona ezensimbi.Ithatha ingcindezi ye-hydraulic njengamandla,sm...

  • Shears HN-3/102

    Shears HN-3/102

    Incazelo emfushane:

    IZICI ZE-HAND NOTCHER 1.I-Heavy-duty blade 2.Insimbi ekhanyayo ukujiya okwengeziwe 3.Ubukhulu bomthamo ngu-3mm 4.Inotha yesandla i-HN-3/102 eyensimbi emaphakathi nepuleti INCAZELO: MODEL HN-3/102 HN-3 Umthamo (Ithani) 3 3 Ukuqina(mm) 1.5 1.5 Izibhakela(mm) 100X100 125x125 90° Angel(mm) 100X100 125x125 Ram stroke(mm) 30 25 NW/GW(kgs) 22/30 ... 2

  • Izikebhe ze-QSM-3

    Izikebhe ze-QSM-3

    Incazelo emfushane:

    IZIMPAWU ZOMSHINI WONKE WOKUgunda Umshini wokugunda uwonke wonke unomsebenzi olula Ungaqeda ukugunda okulandelanayo, ukugunda kwe-arc, ngisho nokugunda umumo ngendlela engafanele.Ingakwazi ukusika izinsimbi zeshidi zibe yinoma yiziphi izinhlobo ngomsebenzi wezandla.Futhi ingaqhubeka nokusika i-rectilinear nokusika i-curvilinear.IMINININGWANE: Imodeli ye-MMS-1 MMS-2 MMS-3 MMS-4 QSM-3 Max.Ubukhulu bokugunda (mm) 1.5 ...

  • Shears Q28B 6*220

    Shears Q28B 6*220

    Incazelo emfushane:

    I-CONNER NOTCH MACHINE EZIPHUMA: Imishini ekukhiqizweni kwebhokisi lensimbi eliyisikwele eline-shear angle, elula, enembile, esheshayo, uhlobo lomkhiqizo we-hydraulic, pneumatic and pedal, ifenisha yezokwelapha, yensimbi, ifenisha yehhovisi lensimbi, i-kitchenware, i-hardware nezinye izimboni zisebenza kakhulu. .Lo mshini usetshenziselwa ikakhulukazi ukusika izinto zensimbi nezingezona ezensimbi.Ithatha ingcindezi ye-hydraulic njengamandla,sm...

  • Shears HN-4

    Shears HN-4

    Incazelo emfushane:

    IKHONA LESANDLA LOKUQAPHELA IZICI EZIPHUMA ZE-ANGLE NOTCHER 1.Insimbi elula kakhulu 2.Ngensimbi enzima kakhulu Umthamo wokucindezela: 4 Ton 3.Inotha yesandla i-HN-4 ikakhulukazi eyensimbi ethambile kanye nepuleti 4.Ukuma kuyakhethwa.1. Nge-heavy-duty blade 2. Insimbi elula ukujiya okwengeziwe 3. Inotha yesandla i-HN-3 ingakwazi ukucubungula insimbi ethambile nepuleti IZINCAZELO: MODEL HN-4 Ubukhulu(mm) 1.5 Punch(mm) 15...

  • I-Shears MS-20

    I-Shears MS-20

    Incazelo emfushane:

    IZICI EZIPHUMA ZOKUSHEWA NGEMANDLA 1. Ibhawodi ebhentshini noma phezulu kwetafula 2. I-blade ingashintshwa kalula 3. Ilungele ipuleti lokusika, insimbi yensimbi, insimbi eyisicaba 4. Umsiki wensimbi ehlala isikhathi eside uhlanganisa i-carbon steel blade eqinile 5. Ingalo esezingeni elineziphethu ezinxephezela IMICIMBI: AMANDLA EMODELI(CM) NW/GW (KG) USIZE WOKUPAKA (CM) I-ROUND STEEL FLAT STEEL SQUARE STEEL MS-20 20 30X8 18X...

  • I-Shears Q28A 4*250

    I-Shears Q28A 4*250

    Incazelo emfushane:

    EZIPHUMA: Imishini ekukhiqizeni ibhokisi lensimbi yesikwele nge-shear angle, elula, enembile, esheshayo, uhlobo lomkhiqizo we-hydraulic, pneumatic and pedal, ifenisha yezokwelapha, yensimbi, ifenisha yehhovisi lensimbi, i-kitchenware, i-hardware nezinye izimboni zisebenza kakhulu.Lo mshini usetshenziselwa ikakhulukazi ukusika izinto zensimbi nezingezona ezensimbi.Ithatha ingcindezi ye-hydraulic njengamandla, ukunyakaza okubushelelezi, ...

  • Shears HS-5

    Shears HS-5

    Incazelo emfushane:

    IZICI EZIPHUMA ZOKUSHELA NGESANDLA 1. Umzimba womsiki oqinile 2. Ingalo esezingeni elinentwasahlobo enxephezelayo 3. Ukusika kalula kubo bonke ubude Imodeli Ikhono(mm) NW/GW (KG) Usayizi wokupakisha(cm) Ubude beblade Ishidi Insimbi Insimbi eyisicaba HS-5 125(5") 6 70x6 11 10/12 33x16x33 HS-6 150(6") 6 70x6 11 11/13 33x16x33 HS-8 200(8") 6 70x6 13 17/16x 5...

<< < Edlule12

Thumela umlayezo wakho kithi:

Chofoza u-enter ukuze useshe noma u-ESC ukuze uvale
Ingxoxo ye-WhatsApp Online!