IIMPAWU ZEMVELISO:
Ukutya okude kunye nokunqamlezayo kwenziwa ngabancedisi bebhola. Iqhutywa ziinjini ze-servo.
Isithuba esithe nkqo okanye esithe tye sesikhululo se-4 okanye isithuba sesixhobo sesikhululo esi-6 okanye izixhobo zemigulukudu zinokukhethwa. Isithuba sibekwe kwiigiya ezichanekileyo eziguquguqukayo ezinokuchaneka okuphezulu okuphindaphindiweyo.
Zombini i-chuck kunye ne-tailstock zibonelelwa ngehydraulic okanye uhlobo lwencwadana.
Umphezulu weendlela zokulala yi-Supersonic frequency lukhuni kunye nomhlaba ochanekileyo kunye nobomi obude benkonzo.
Isayizi yebhore yokuphotha yi-Ø 80mm. Inkqubo ye-spindle iphezulu kwi-rigidity kunye nokuchaneka.
INGCACISO:
IZINTO | CK6140ZX | CK6146ZX | CK6150ZX |
Phezu kwebhedi | Ø400mm | Ø460mm | Ø500mm |
Ukuthwala ngaphezulu | Ø210/Ø165mm (Izixhobo zemigulukudu) | Ø240/Ø205mm (Izixhobo zemigulukudu) | Ø280/Ø245mm (Izixhobo zemigulukudu) |
Ubuninzi obujikiweyo ubude | 750/1000/1500mm | ||
Max. ukujika ubude | 600/850/1350 mm | ||
Impumlo yokusonta | D8 | ||
I-Spindle bore | Ø80mm | ||
I-cone hole ububanzi kunye ne-taper yomngxuma wokusonta | MT.No7 | ||
Amanyathelo esantya sokusonta (Manuwali) | Iyaguquguquka | ||
Uluhlu lwesantya sokusonta | 100 ~ 2000r / min | ||
Ukutya okukhawulezayo kwe-Axis Z | 10m/min | ||
Ukutya okukhawulezayo kwe-Axis X | 8 m/mz | ||
Max. uhambo lwe-Axis Z | 710/960/1460 mm | ||
Max. uhambo lwe-Axis X | 250/330mm(Izixhobo zemigulukudu) | ||
Min. igalelo | 0.001mm | ||
Izikhululo zeposi zesixhobo | Iindlela ezi-4 okanye iindlela ezi-6 okanye izixhobo zemigulukudu | ||
Tool cross section | 25×25 mm | ||
Idayimitha yangaphandle | Ø75mm | ||
I-taper ye-bore | MT.No.4 | MT.No.5 | |
Max. Tyelela | 130mm | ||
Amandla emoto ephambili | 5.5KW(Eyongezelelweyo 7.5KW) | ||
Amandla epompo yokupholisa | 75W | ||
Imilinganiselo iyonke(L×W×H) | 2060/2310/2790×1180×1500mm | ||
Ukusinda okushiyekile | 2100,2250,2800Kg | 2200,2350,2900kg |