Hoton Machinery CNCUmatshini WokubholaI-ZK5140 kunye ne-ZK5150
1. I-Zk5140B kunye ne-Zk5140B-1 umatshini wokugaya i-cnc ethe nkqo ngumatshini wokugrumba jikelele.i-max drilling diameter yi-40mm.
I-2.Zk5150B kunye ne-Zk5150B-1 umatshini wokugaya i-cnc ethe nkqo ngumatshini wokugrumba jikelele.i-max drilling diameter yi-50mm.
3. Itheyibhile ye-Zk5140B, i-Z5150B igxininisekile kwaye i-Zk5140B-1, i-Zk5150B-1 i-cross table.
4. Lo matshini unako ukwandisa umngxuma, ukugrumba umngxuma onzulu, ukucofa, ukukruqula njalo njalo ngaphandle komngxuma wokugrumba.
5. Lo matshini woluhlu uneenzuzo ezininzi, ezifana nokusebenza okuphezulu, ukuqina okuhle, ukuchaneka okuphezulu, ingxolo ephantsi, uluhlu olubanzi lwesantya..
Inkcazo | Iyunithi | ZK5140 | ZK5150 |
Ubungakanani betafile | mm | 1000X545 | |
Indawo yokusebenzela | mm | 850X400 | |
Ubukhulu bokomba bedayamitha | mm | φ40 | φ50 |
T-slot ububanzi / ubungakanani | mm | 18/3 | 18/3 |
Umngxuma we-spindle taper | MT #4 | MT #5 | |
Izantya zokusonta | r/min | 31.5-1400/12 amanyathelo | |
Amandla e-spindle motor | kw | 3 | |
Uhambo oluthe nkqo lwentloko yokomba (manual) | mm | 360 | |
Uhambo(X/Y/Z) | mm | 850/400/240 | |
Umgama ukusuka empumlweni yokusonta ukuya kwitafile yokusebenza | mm | 100-700 | 65-665 |
Umgama ukusuka kumgca wombindi we-spindle ukuya kwikholamu | mm | 335 | |
Uhambo olukhawulezayo lwe-X/Y/Z | m/umz | 15/15/3.5 | |
Inkqubo ye-CNC | Inkqubo ye-KND | ||
I-torque enkulu ye-spindle | Nm | 350 | |
Ukumelana okuphezulu kokutya | N | 10000 | 12000 |
Ukubeka ukuchaneka | mm | ±0.025 | |
Ukubeka ngokutsha ukuchaneka | mm | ±0.015 |