Product Description

This machine is mainly used in repairing and renewing inlet and outlet valve holes on internal combustion engines on automobiles and motorcycles.  It has three major functions:

1.1 With an appropriate positioning mandrel, the forming cutter can do a repair job on a hole of the diameter within Φ 14 ~ Φ 63.5 mm on the tapered working surface on s valve retainer (The cutters needed for forming special cone angles and the special positioning mandrels, whose dimensions are not in the configuration of the equipment, can be ordered with a special order).

1.2  The machine is able to remove and install valve seat rings of the diameters Φ 23.5 ~ Φ 76.2 mm (The cutters and installing tools need to be ordered with a special order).

1.3  The machine is able to renew or remove a valve guide, or replace it with a new one (The cutters and installing tools need to be ordered with a special order).

This machine is suitable for renewing and repairing the inlet and outlet valve holes of the diameters within Φ 14 ~ Φ 63.5 mm on the cylinder heads of most of the engines.

Feature

1) 3 angle single blade cutter cut all three angles at once and ensure accuracy, finish the seats with no grinding.They assure exact seat widths from head to head plus concentricity between seat and guide.

2) Fixed pilot design and ball drive combine to automatically compensate for slight deviations in guide alignment, eliminating additional setup time from guide to guide.

3) Light weight power head "air-floats" on rails paralle to table surface up and away from the chips and dust.

4) Universal handles any size head.

5) Spindle tilts at any angle up to 12°

6) Dial in any spindle speed from 20 to 420 rpm without stopping rotation.

7) Comlete acc's supplied with machine and can be exchanged with Sunnen VGS-20

Main Technical Parameters