LARGE SPINDLE HOLE PRECISION LATHE
THE FEED BOXES OF THE TWO MODLE ARE DIFFERENCE.
CH SERIES NEED CHANGE GEARS AND THE CHF SERIES DON'T NEED IN THREAD MACHINING.
SPECIFICATIONS:
MODEL |
C6236F |
C6240F |
C6250F |
C6260F |
||
CAPACITY |
Max.swing over bed |
360mm |
400mm |
500mm |
600mm |
|
Max.swing over cross slide |
190mm |
230mm |
330mm |
330mm |
||
Max.swing over gap |
520mm |
560mm |
660mm |
760mm |
||
Effective length of gap |
200mm |
|||||
Center Distance |
75010001500mm |
|||||
Bed Width |
360mm |
|||||
HEADSTOCK |
Spindle hole |
52mm |
||||
Spindle nose |
ISO-C6 |
|||||
Spindle taper |
MT6 |
|||||
Spindle speed(Number) |
(12steps)16-1600rpm |
|||||
FEEDS |
Longitudinal feeds range |
0.0832-4.66mm/r |
||||
Cross feeds range |
0.048-2.69mm/r |
|||||
Metric threads range |
19kinds 0.25-14mm |
|||||
Inch threads range |
49kinds 2-40inch |
|||||
Moudule threads range |
11kinds 0.5-3.5mπ |
|||||
CARRIAGE |
Max.travel of top slide |
95mm |
||||
Max.travel of cross slide |
180mm |
222mm |
||||
Max.size of toolshank |
20*20mm2 |
|||||
TAILSTOCK |
Dia.of tailstock sleeve |
65mm |
||||
Taper of tailstock sleeve |
MT4 |
|||||
Max.travel of tailstock |
140mm |
|||||
MOTOR |
Main drive motor |
4KW |
5.5KW |
7.5KW |
||
Coolant pump motor |
125W |
STANDARD ACCESSORIES | OPTIONAL ACCESSORIES |
3-jaw & 4-jawSteady rest & follow restFace plateDrive plateThread-cutting dial
Longitudinal touch stop Work lamp Coolant system Full-length splash guard Foot brake and brake ribbon Change gears Dead center and center sleeve Oil gun Paddings One whole set spanner |
Rapid travelLive centerDigital readouts(SINO)Chuck guard and Tool post guardTaper turning attachment |