HIGH SPEED BENCH LATHE MACHINE (C0632A/750)
1. Precision ground hardened bedways
2. The spindle is supported wish precision roller bearings
3. Headstock gears are made of high quality steel, ground and hardened
4. Removable gap is provided for larger diameter work
5. Easy operation speed change levers
6. Spindle speed range 70~2000r/min
7. Two different length beds are available
8. Easy operating gear box has various feeds and thread cutting function
9. D1-4 camlock spindle nose
MODELS |
C0632A×750 |
C0632A×1000 |
C0636A×750 |
C0636A×1000 |
Swing over bed | 330mm(13") | 360mm(14") | 358mm(14") | |
Swing over cross slide | 198mm(7-25/32") | 224mm(8-13/16") | 223mm(8-25/32") | |
Swing in gap diameter | 476mm(18-3/4") | 502mm(19-3/4") | 502mm(19-3/4") | |
Swing in length | 210mm(8-1/4") | 210mm(8-1/4") | 210mm(8-1/4") | |
Center height | 166mm(6-1/2") | 179mm(7") | 179mm(7") | |
Admits between | 750mm(30") | 1000mm(40") | 750mm(30") | 1000mm(40") |
Bed width | 187mm(7-3/8") | 187mm(7-3/8") | 187mm(7-3/8") | |
Bed length | 1405mm(55-5/16") | 1655mm(65-1/8") | 1405mm(55-5/16") | 1655mm(65-1/8") |
Bed height | 290mm(11- 13/32") | 290mm(11- 13/32") | 290mm(11- 13/32") | |
Spindle bore | 38mm(1-1/2") | 38mm(1-1/2") | 38mm(1-1/2") | |
Spindle nose | D1-4" | D1-4" | D1-4" | |
Taper in nose | MT NO.5 | MT NO.5 | MT NO.5 | |
Taper in sleeve | MT NO.3 | MT NO.3 | MT NO.3 | |
Speeds number | 8 | 8 | 8 | |
Range of spindle speed | 70-2000 r/min | 70-2000 r/min | 20~450 or 135~3000r.p.m | |
Cross slide width | 130mm(5-3/32″) | 130mm(5-3/32″) | 130mm(5-3/32″) | |
Cross slide travel | 170mm(6-11/16") | 170mm(6-11/16") | 160mm(6-5/16") | |
Compound rest width | 80mm(3-1/8″) | 80mm(3-1/8″) | 80mm(3-1/8″) | |
Compound rest travel | 95mm(3-9/16") | 95mm(3-9/16") | 95mm(3-9/16") | |
Lead screw diameter | 22mm(7/8″) | 22mm(7/8″) | 22mm(7/8″) | |
Lead screw thread | 8T.P.I. or 3mm | 8T.P.I. or 3mm | 8T.P.I. or 3mm | |
Feed rod diameter | 19mm(3/4") | 19mm(3/4") | 19mm(3/4") | |
Cutting tool max section | 16mm×16mm(5/8"×5/8") | 16mm×16mm(5/8"×5/8") | 16mm×16mm(5/8"×5/8") | |
Threads imperial pitches | 34 Nos.4-56 T.P.I | 34 Nos.4-56 T.P.I | 34 Nos.4-56 T.P.I | |
Threads metric pitches | 26 Nos.0.4-7 M.P | 26 Nos.0.4-7 M.P | 26 Nos.0.4-7 M.P | |
Longitudinal feeds imperial | 32 Nos.0.002-0.548"/Rev | 32 Nos.0.002-0.548"/Rev | 32 Nos.0.002-0.548"/Rev | |
Longitudinal feeds metric | 32 Nos.0.052-0.392mm/Rev | 32 Nos.0.052-0.392mm/Rev | 32 Nos.0.052-0.392mm/Rev | |
Cross feeds imperial | 32 Nos.0.007-0.0187"/Rev) | 32 Nos.0.007-0.0187"/Rev | 32 Nos.0.007-0.0187"/Rev | |
Cross feeds metric | 32 Nos.0.014-0.380mm/Rev | 32 Nos.0.014-0.380mm/Rev | 32 Nos.0.014-0.380mm/Rev | |
Quill diameter | 32mm(1-1/4") | 32mm(1-1/4") | 32mm(1-1/4") | |
Quill travel | 100mm(3-15/16") | 100mm(3-15/16") | 100mm(3-15/16") | |
Quill taper | MT NO.3 | MT NO.3 | MT NO.3 | |
For main motor | 2HP, 3PH or 2PH, 1PH | 2HP, 3PH or 2PH, 1PH | 2HP, 3PH or 2PH, 1PH |