Products

Hand Feeding Perform Automatic Blow Moulding Ma...

Short Description:

Product Description： BX-S series, newly developed by our company, is a two-step automatic PET bottle blow moulding machine, which can be operated by hands or conveyor to feed the preforms. BX-S series is of one cavity and the maximum volume of the bottles is 0.6L, 2.5L, 5L. It can blow various bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, and other packing container...
Air Compressor

Short Description:

Air Compressor Cooling the inner surface of the preform without using the high pressure compressed air , unlike most post-mold cooling systems which only cool the outer surface. Optimized cycle utilization - being mounted on the moving platen , the cooling system remains active within 85% of the overall cycle-time. Capacity of PET injection molding system is from 280 to 500 tonnes ( 2800KN to ...
Full Automatic Bottle Blowing Machine BX-S6 BX...

Short Description:

Product Description： 1. Utilization of automatic central lubrication. 2. Compact space design for convenience of mold-conversion, repairing, and maintenance. 3. Minimized transfer pitch for increasing heating efficiency and saving energy. 4. Swift exchange design for preform mandrels. 5. Optimized air flow in the oven for stable heating process. 6. Easy to adjust, exchange and access heating o...
Full Automatic Bottle Blowing Machine BX-S2 B...

Short Description:

Product Description： BX-S2 Full-automatic PET stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. IIt can blow bottles in shapes: Mineral bottles, which is made of plastic of crystalline type, such as PET. Settings: (a). PLC colour display: DELTA(Taiwan) (b). Pneumatic parts: FESTO(Germany) (c). Controller of preform transfer: Servo motor Na...
Full Automatic Bottle Blowing Machine BX-5000A...

Short Description:

Product Description： BX-5000AFull-automatic bottle blow molding machine is the most stable two-step automatic stretch blow moulding machine. IIt can blow bottles in shapes: Mineral bottles, which is made of plastic of crystalline type, such as PET. Settings: (a). PLC colour display: DELTA(Taiwan) (b). Pneumatic parts: SMC(JAPAN ) (c). Controller of preform transfer: Servo motor National...
Full Automatic Bottle Blowing Machine BX-20L-1...

Short Description:

Product Description： The features of BX-20L-1 PET bottle blowing machine: 1. Power-saving design. 2. Double crank with 4 bars to lock mold. 3. Imported HP blow system. 4. High transparency & high productivity. 5. Perfect function with economic investment. 6. Small size and compact construction with no space waste. 7. Easy to operate and maintain, operation by one person. 8. Bars to lock mo...
Full Automatic Bottle Blowing Machine BX-12L-2...

Short Description:

Product Description： Features: 1. Stable performance with advanced PLC.4 sets servo motors . 2. Conveying preforms automatically with conveyor. 3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. 4. High adjustability to enable the preheater to preheat preforms in shapes ...
Full Automatic Bottle Blowing Machine BX-S3 BX...

Short Description:

Product Description： 1. Utilization of automatic central lubrication. 2. Compact space design for convenience of mold-conversion, repairing, and maintenance. 3. Minimized transfer pitch for increasing heating efficiency and saving energy. 4. Swift exchange design for preform mandrels. 5. Optimized air flow in the oven for stable heating process. 6. Easy to adjust, exchange and access heating o...
PET Preform Injection Molding System

Short Description:

PET Preform Injection Molding System 高速注坯系统 Cooling the inner surface of the preform without using the high pressure compressed air , unlike most post-mold cooling systems which only cool the outer surface. Optimized cycle utilization - being mounted on the moving platen , the cooling system remains active within 85% of the overall cycle-time. Capacity of PET injection molding system is ...
Water Bottle Stretch Blow Molding Machines

Short Description:

Semi Automatic Bottle Blowing Machine 1.Adopt special electronically controlled loop design while heating lamps;high efficiency in simultaneous controlling one lamp or large quantities, lower power consumption. 2. Adopt heat transfer and feedback theory to decide the shape and thickness of bottle embryo. 3. Heating furnace is always under stable temperature.The embryo will be heated evenly , no...
Semi Automatic Bottle Blowing Machine Series

Short Description:

Semi Automatic Bottle Blowing Machine BX-D2 (20L) / BX-C (6L) /BX-CA (5L) / BX-B (2.5L) 1.Adopt special electronically controlled loop design while heating lamps;high efficiency in simultaneous controlling one lamp or large quantities, lower power consumption. 2. Adopt heat transfer and feedback theory to decide the shape and thickness of bottle embryo. 3. Heating furnace is always under stable...
L type worktable Column Drilling Machine Z5040L

Short Description:

Model Unit Z5040L Max. Drilling dia. mm 40 Max. Tapping dia. mm M27 Column dia mm 160 Max. Spindle shaft travel mm 180 The spindle axis distance to column no 360 Max.distance spindle nose up to table R/min 590 Max.distance spindle nose up to base mm 1175 Spindle morse MT4 Spindle speed R/min 50-1450 Spindle speed steps 12 Table size mm 560X560 Overall ...
Cylinder Head And Cylinder Block Pressure Teste...

Short Description:

TPT1600 cylinder head pressure tester for engine remanufacture Easy and efficient pressure test of cylinder head and cylinder block coolant circuits for engine remanufacture. Quick and easy clamping system allowing tests at a pressure of 4 to 5bar. Model TPT1600 TPT1600L TPT1700XL Maximum length of cylinder head 1250 mm 1350mm 1350mm Maximum width of cylinder head 400 mm 425mm 460mm ...
Valve Seat Grinder VR90(3M9390A)

Short Description:

3M9390A Valve grinder is specially designed for automobile repairing factories and agricultural machinery repairing centers. It is compact and light weight, with simple construction and easy operation. It is necessary equipment for automobile repairing service. Model Unit VR90/3M9390A Max. dia. of valves to be ground mm 90 Dia. of valve stems to be gripped (standard) mm 6 ~ 16 Dia. of...
Universal Drilling and Milling Machine ZX6350C

Short Description:

Gear driven; X axis auto feed ZX6350C is a kind of economic-type drilling and milling machine, light and flexible, is used for mechanical maintenance, non-batch parts processing and components manufacturing. The vertical head swivels to both sides (+-) 90 UNIVERSAL MILLING MACHINE HOTONMC ZX6350C Table size 1200X280 Number of T-slots 3 T-slot size 14 Spindle to table 100-480 Numbe...
Bansaw machine G5027

Short Description:

1. G5027 Horizontal metal cutting band saw with One piece cast-iron construction of the saw frame ensure exact angles and low vibration 2. G5027 Horizontal metal cutting band saw for miter cuts, the operator moves the saw frame, not the material 3. Hydraulic cylinder for infinitely variable saw frame feed 4. G5027 Horizontal metal cutting band saw with 2 saw blade speeds 5. pressure gauge indic...
CNC Lathe Machine CK6136

Short Description:

CNC LATHES FEATURES: high rigidity pedestal and wider lay board are suitable for heavy cutting four station electric turret inverter stepless speed S. No. Description HOTONCK6136/750mm 1 2 – Axis Horizontal Lathe X axis:750mmZ axis:500mm 2 Swing over bed: 360 3 Controller: FANUC 4 Distance between centers: 750 5 Spindle speed: 150-2000 6 Spindle Bore: 52 7 Spindle Taper A2...
Drilling Milling Machine Zx50z

Short Description:

Features: 1. Universal use as milling machines and drill press 2. Easily shiftable gear drive ensures power transmission without losses 3. Gear box spindle drive,with automatic feeding of spindle and micro feeding. 4. Head swivels into the horizontal level on both sided via crank and toothed gear, easy activation of manual micro-feed for the spindle quill 5. Spindle and quill with large diamete...
Tube Bender Pipe Bending Machine RB-2

Short Description:

Performence Features: 1.The hand pipe bender is manually operated. 2.The hand pipe bender has the advantage of easy operation. 3.The hand pipe bender is equipped with the complete standard molds that can meet the demands of various work pieces. Technical parameter: Model RB-2 Max. Bending angle up to 180 degree Wall thickness 0.8-1.2mm Standard dies 1/4"x3D,1/4"x5D,5/16"x3D,5/16"x5D,3...
CNC Slant Lathe Machine TCK50A

Short Description:

Product main features: Higher accuracy Taiwan linear guideways Higher speed spindle unit,optional homemade spindle Higher rigidity cast iron Integrated automatic lubrication One-piece casting slant bed cnc lathe Model Unit TCK50A Max.swing over bed mm 560 Max.swing over cross slide mm 260 Max.workpiece length mm 350/500 Spindle unit mm 200 The spindle nose(optional chuck) A2...