-
Hand liter HP-4T
Short Description:
Model Hand lifter Rated load lifting capacity 4000Kg Max. lifting height 1600mm Fork low put height ≤100mm Fork adjusting width 240~580mm Leg internal width 580mm Leg external width 730mm Fork Max. adjustable external width 580mm Fork effective length 800mm Load center distance 400mm Raising speed ≥...
-
Folding Machine PBB1020/2.5 PBB1270/2 PBB1520/1.5
Short Description:
MANUAL SHEET BENDING MACHINE 1.For formed component bending. 2.A fully welded structure, and compact high quality engineering, ensure minimum maintenance, together with simple and safe operation. 3.Have the function of air spring which can be installed inside the arm (Optional). 4.Adjustable bending angle stop with scale up to 135 ° 5.With foot control. It is easy for operation and relax hands ...
-
Radial drilling machine Z3032X9 Z3032X10
Short Description:
RADIAL ARM DRILLING MACHINE FEATURES: 1. Frequency Conversion Radial Drilling Machine; 2. Strength spindle, with limiting protection for limiting position; 3. Electrical box and coolant button is on the right of spindle box; 4.Hydraulic pressure clamp; 5.Interlock of rocker arm clamping and up down movement; 6.Clamping of spindle and spindle box could be simultaneous or separated; 7.Trochoi...
-
Horizontal Metal Turning Lathe Machine CQ6240
Short Description:
MODEL CQ6240 Swing over bed Φ400mm Swing over cross slide Φ250mm Swing in gap(D×W) 520mm×100mm Height of center 200mm Distance between centers 1080mm Turning Length 700-750mm Width of bed 218mm Max. section of cutting tool 20mm×20mm Guide Length of carriage 350-365 Graduation of Longitudinal scale on apron boxhand wheel 0.2mm Total travel of cross slide 230mm Graduati...
-
Hack Saw HS7125
Short Description:
HYDRAULIC POWER HACKSAW MACHINE: Infinitely variable saw feed perssure control Complete electronic component with motor Protection Recirculating coolant sytem Clamping device for short ends Equalixing bar for jaws Nesting fixture for multiple sawingof stacked bars samll rounds and tubing Automatic cutting process With safety protection device It has different speeds and wide cutting scope. Hydr...
-
CNC Wire EDM Machine DK7740 DK7745
Short Description:
Product Description: ●High precision: imported high rigidity and high strength guide rail, double nut ball screw and machine tool are adopted, and the manufacturing process parameters are 3 ~ 5 times higher than the national standard. ●High finish: it adopts a variety of wire cutting methods and automatic wire tightening device, which can realize multiple cutting and fast wire walking machine f...
-
Grinding Machine MQ-6025A
Short Description:
FEATURES: This series machine are specially suitable for sharpening tools in HSS, tungsten carbide and other materials, also for cylindrical, surface, slot and profile grinding wor. By using additional attachments, you greatly extend the range of application of there machinery and can solve individual machining problems, such as grinding fo various hobs, tools, spherical cutters, twist drills a...
-
CNC Wire EDM Machine DK77120
Short Description:
Product Description: ●High precision: imported high rigidity and high strength guide rail, double nut ball screw and machine tool are adopted, and the manufacturing process parameters are 3 ~ 5 times higher than the national standard. ●High finish: it adopts a variety of wire cutting methods and automatic wire tightening device, which can realize multiple cutting and fast wire walking machine f...
-
Shears QC11Y QC11Y-6×2500
Short Description:
DESCRIPTION: • CNC Shearing Machine device is a very suitable for torsional axis shearing machine, providing solutions for most of the wiggle or gate machine both complete and economy, with high performance, flexible configuration, compact structure, easy to use, high reliability characteristic Servo control, can realize the back gauge and high accuracy of control block. The gap (G-axis) is con...
-
CNC Wire EDM Machine DK77160
Short Description:
Product Description: ●High precision: imported high rigidity and high strength guide rail, double nut ball screw and machine tool are adopted, and the manufacturing process parameters are 3 ~ 5 times higher than the national standard. ●High finish: it adopts a variety of wire cutting methods and automatic wire tightening device, which can realize multiple cutting and fast wire walking machine f...
-
Wire Cutting Machine DA500 DA600 DA800
Short Description:
Product discription: Variable frequency energy-saving technology is adopted,which is more environmental-friendly and energy-saving. When the cutting processing is ended , the sleeve will be automatically stopped at the right side , which facilitates molybdenum wire traveling. The power supply can be automatically cut off after cutting , and it canbe automatically started after power off . The s...
-
Wire Cutting Machine DE320 DE400 DE500 DE600 DE800
Short Description:
Product discription: ●Variable frequency energy-saving technology is adoptedwhich is more environmental-friendly and energy-saving. ●When the cutting processing is ended , the sleeve will be automatically stopped at the right side , which facilitates molybdenum wire traveling. ●The power supply can be automatically cut off after cutting ,and it can be automatically started after power off. ●The...
-
CNC EDM wire cutting machine DK7725M DK7732M DK...
Short Description:
Performance Indicators : ●The structure and casting process of the main body of the machine. ●Max cutting efficiency≥ 200mm2 / min. ●Best surface roughness≤Ra0.8μm. ●X， Y , U，V , Z five axis composes of Taiwan HIWIN linear guide and high precision double nut ball screw rod. ●High precision cuttings≤±2μm. ●Continuous cutting 100,000 mm2 molybdenum wire loss≤0.005mm ●The whole machine adopts th...
-
Surface Grinder Machine MY618A
Short Description:
Specifications Units MY618A Table Size mm 460×180 Max.work piece to be ground mm 500×190×335 Max. grinding length mm 500 Max. grinding width mm 200 Distance from table to spindle mm 350 Slide way V-type rail with Steel-ball V-type rail with steel-ball kg 200 Number of T -slot mm×n 17×1 Speed of working table m/min 0-23 Manual Micro feed: mm 0.002/0.01 Down Feed...
-
CNC EDM wire cutting machine DK7732HC DK7740HC ...
Short Description:
Product Discription: ●Add the fifth axis on the basis of X , Y , U . V axis . To achieve the workpiece rotation cutting processing. ●Standard electronic hand wheel control , user-friendly adjustment and operation. Reciprocating wire type ●The use of frequency converter to achieve wire speed stepless adjustment , to achieve smooth operation with low noise. ●Run wire using PLC control to achieve ...
-
CNC Mini Wire Cutting Machine DK350 DK450 DK450...
Short Description:
Product Discription: ●Adopt cutomized jellery membrane and aluminum outflow plate. ●The waterproof cover of the rear guide pulley is cleaner. ●Adopt waterproof blind-through guide wheel for easy operation. ●Nano material is adopted for the water shield , which is crack-proof explosion-proof , soild and durable. ●It is more convenient to slide the water retaining cover. Universal Optional Access...
-
Shears QC11Y QC11Y-6×2500
Short Description:
DESCRIPTION: • CNC Shearing Machine device is a very suitable for torsional axis shearing machine, providing solutions for most of the wiggle or gate machine both complete and economy, with high performance, flexible configuration, compact structure, easy to use, high reliability characteristic Servo control, can realize the back gauge and high accuracy of con...
-
Bench Lathe CZ1340A
Short Description:
BENCH LATHE MACHINE FEATURES: The clutch inside headstock realize the spindle to change FWD/REV direction. It avoids electric motor to be changed frequently Supersonic frequency hardened bed ways Precision roller bearing for spindle High quality steel, ground and hardened gear inside headstock Easy and fast operating gear box Enough strong power motor ASA D4 camlock spindle nose Various thread ...
-
CNC Wire cutting EDM Machine DK7732HA DK7740HA ...
Short Description:
Product Discription: ●Add the fifth axis on the basis of X , Y , U , V axis . To achieve the workpiece rotation cutting processing. Reciprocating wire type ●The use of frequency converter to achieve wire speed stepless adjustment , to achieve smooth operation with low noise ●Run wire using PLC control to achieve variable stroke reciprocating wire , forward and reverse travel to any set. ●Realiz...
-
EDM Die Sinking Machine D7125 D7132 D7140 D7145...
Short Description:
Main Features 1) Japan SANYO DC servo motor in Z axis. 2) X,Y axes adopts precise ball screw. 3) Professional database system. 4) High speed 400mm3/min. 5) Surface roughness Ra0.8. 6) Taiwan control system. 7) Germany guideway.PVC coating for wear resistance. 8) SIEMENS,Germany AC contactor. 9) OMRON relay. 10) Japan high frequency power tube. 11) Harbin bearings.P5 grade. 12) Castings,HT250 re...