Welcome to our websites!
PET Preform Injection Molding System
PET Preform Injection Molding System
高速注坯系统
- Cooling the inner surface of the preform without using the high pressure compressed air , unlike most post-mold cooling systems which only cool the outer surface.
- Optimized cycle utilization - being mounted on the moving platen , the cooling system remains active within 85% of the overall cycle-time.
- Capacity of PET injection molding system is from 280 to 500 tonnes ( 2800KN to 5000KN ) , and it is available for the preform mould maximum with 96 cavities.
|
Model |
Flow ( m3 / min) |
Dimension L*W*H(m) |
|||
|
0.7mpa |
0.8mpa |
1.0mpa |
1.2mpa |
||
| 15kw | 2.5 | 2.3 | 2.1 | 1.8 | 1.45x1.35x1.45 |
| 18.5kw | 3.1 | 2.9 | 2.6 | 2.2 | 1.60x1.35x1.45 |
| 22kw | 3.7 | 3.5 | 3.1 | 2.9 | 1.60x1.35x1.75 |
| 30kw | 5.3 | 5.0 | 4.6 | 3.9 | 1.60x1.35x1.75 |
| 37kw | 6.7 | 6.2 | 5.7 | 5.0 | 1.60x1.35x1.85 |
| 45kw | 7.2 | 7.0 | 6.2 | 5.7 | 1.80x1.55x1.85 |
| 55kw | 10.0 | 9.1 | 8.2 | 7.4 | 2.10x1.80x1.85 |