FEATURES:
These lathes can perform to turn end faces, cylindrical surfaces and intemal holes
of marious parts as well as metric, inch, module and pitch threads. The top slides can
be operated indivedu
-
ally by power for cutting short taper surface also, can be turned
automatlcally through the compound movement combining long tudinal feed with the top
slide feed, moreover, the machines may be used for drilling, boring and trepanning
. They
are characteristics of power, high spindle speed, highrigidity
. The various ferrous and non
ferrous metals parts may be turned through the heavy cutting by carbon alloytools.
SPECIFICATIONS:
Model |
CW6 1/2 100D |
CW6 1/2 125D |
CW61/2 140D |
CW6 1/2 160D |
|
CAPACITY |
Max.swing diameter over bed |
Φ1040mm |
Φ1290mm |
Φ1440mm |
Φ1640mm |
Max.swing diameter over carriage |
650mm |
900mm |
1030mm |
1030mm |
|
Max. Swing diameters on gap |
1500 |
1750mm |
1900mm |
2100mm |
|
Width of bed |
755mm |
||||
Max. Length of work piece |
1000mm 1500mm 2000mm-12000mm |
||||
The top two largest bearing |
6t |
||||
SPINDLE |
Spindle nose |
A2 15 |
|||
Spindle bore diameters |
120mm 130mm(s) |
||||
Taper of spindle bore |
Metric NO.140 |
||||
Range of spindle speed |
3.15-315r/min 21 kinds 3.5-290r/min 12 kinds |
||||
Spindle front bearing inner diameter |
200mm |
||||
FEEDS |
Longitudinal feeds range |
0.1-12r/min 56kinds |
|||
Transversal feeds range |
0.05-6mm/r 56kinds |
||||
Metric treads range |
1-120mm 44kinds |
||||
Inch thread range |
3/8-TPI 31kinds |
||||
Moudle threads range |
0.5-60mm 45kinds |
||||
Pitch threads range |
1-56TPI 25kinds |
||||
TAILSTOCK |
Taper of tailstock sleeve |
Metric 80# |
|||
Travel of tailstock sleeve |
300mm |
||||
Diameters of tailstock sleeve |
160mm |
||||
MOTORS |
Main motor power |
22kw |
|||
Rapid motor power |
1.5kw |
||||
Coolant pump power |
0.125kw |
||||
WEIGHT |
Work piece length 5000mm |
13600kg |
14300kg |
14600kg |
15100kg |
For every 1 meter increase or decrease, the weight increases or decreases by 900kg |