LARGE SPINDLE bolongan presisi bubut
KOTAK FEED ROH MODLE iku beda.
CH SERIES kudu ngganti gear lan CHF SERIES ora perlu ing mesin thread.
SPESIFIKASI:
MODEL | C6236F | C6240F | C6250F | C6260F | ||
KAPASITAS | Max.swing liwat amben | 360 mm | 400 mm | 500 mm | 600 mm | |
Max.swing liwat salib geser | 190 mm | 230 mm | 330 mm | 330 mm | ||
Max.swing liwat longkangan | 520 mm | 560 mm | 660 mm | 760 mm | ||
Dawane longkangan efektif | 200 mm | |||||
Jarak Pusat | 75010001500mm | |||||
Jembare amben | 360 mm | |||||
HEADSTOCK | bolongan Spindle | 52 mm | ||||
irung spindle | ISO-C6 | |||||
Spindle taper | MT6 | |||||
Kacepetan spindle (nomer) | (12 langkah) 16-1600rpm | |||||
FEED | Range feed longitudinal | 0,0832-4,66mm / r | ||||
Cross feed sawetara | 0,048-2,69 mm / r | |||||
Range benang metrik | 19 jinis 0.25-14mm | |||||
Range benang inci | 49 jinis 2-40 inch | |||||
Moudul benang kisaran | 11 jinis 0,5-3,5mπ | |||||
KANGGO | Max.travel saka ndhuwur geser | 95 mm | ||||
Max.travel saka geser salib | 180 mm | 222 mm | ||||
Max.size saka toolshank | 20*20mm2 | |||||
TAILSTOCK | Dia. saka tailstock lengan | 65 mm | ||||
Taper saka tailstock sleeve | MT4 | |||||
Max.travel saka tailstock | 140 mm | |||||
MOTOR | Motor penggerak utama | 4KW | 5,5KW | 7,5KW | ||
Motor pump coolant | 125W |
STANDARAKSESORI | AKSESORI PILIHAN |
3-rahang & 4-rahang Istirahat stabil & ikuti istirahat Lampu kerja Sistem coolant Penjaga cipratan lengkap Rem sikil lan pita rem Ganti gir Lengan tengah lan tengah mati bedhil lenga Paddings Siji set kunci pas | Travel RapidLive centerDigital readout(SINO)Chuck guard and Tool post guard Lampiran putar lancip |