IHE NDỊ DỊ MMADỤ MMADỤ NKE HOLOW SPINDLE:
Q13 usoro nke ọkpọkọ threading lathe bụ tumadi na-eji maka nhazi n'ime na mpụga ọkpọkọ eriri (gụnyere metric eri, inch eri wdg), na nwekwara ike ịmalite dị iche iche ntụgharị ọrụ dị ka mbịne n'ime na mpụta cylindrical elu, na ndị ọzọ mgbanwe na njedebe elu wdg. .
Nke a usoro lathe na-onwem na a taper ngwaọrụ, nke a pụrụ iji maka nhazi taper akụkụ.
NKWUO:
Nkọwapụta nke YIMAKE LATHE igwe | |||
NGWA | UNIT | Q1338 ọkpọkọLathe | |
Isi | Oke. Dia. na-efegharị n'elu akwa | mm | Φ1000 |
Oke. Dia. ịmafe n'elu obe slide | mm | Φ610 | |
Anya n'etiti etiti | mm | 1500 | |
Oke nke ike eri | mm | Φ190-380 | |
Ogologo ụzọ akwa | mm | 755 | |
Isi moto | kw | 22 | |
Igwe mgbapụta oyi oyi | kw | 0.125 | |
Spindle | Spindle gbara | mm | Φ390 |
Ọsọ ọsọ | r/min | Nzọụkwụ 9: 6-205 | |
Ogwe taper | Oke. nhazi taper | -- | 1:4 |
Oke. njem nke taper ndu mmanya | mm | 1000 | |
Ihe nbipute ngwaọrụ | Ngwa biputere njem | mm | 300 |
Anya dị n'etiti spindle center na post ngwaọrụ | mm | 48 | |
Ogo nke ngalaba akụrụngwa | mm | 45×45 | |
Oke. ntụgharị akụkụ nke post ngwaọrụ | ° | ±90° | |
Ndị na-edu ndú | Ntugharị ndu (mm) | inch | 1/2 |
Nri | Z axis ndepụta | mm | 32 ọkwa / 0.1-1.5 |
X axis ndepụta | mm | 32 ọkwa / 0.05-0.75 | |
Ibu ibu | Gafe njem slide | mm | 520 |
Ịnya ụgbọ n'ike n'ike | mm/min | 3740 | |
eriri | eri metric | mm | 23 ọkwa / 1-15 |
eri inch | tpi | 22 ọkwa / 2-28 | |
Ọdụdọ ọdụ | Dayameta ọdụ ụgbọ mmiri | mm | Φ140 |
Tailstock quill taper | ọzọ | m6 # | |
Tailstock quill njem | mm | 300 | |
Ọdụdọ cross njem | mm | ± 25 | |
Ndị ọzọ | Akụkụ (L/W/H) | mm | 5000×2100×1600 |
net arọ (kg) | kg | 11500 | |
Mkpokọta nha | kg | 13000 | |
Ngwa ngwa | Ihe nbipute ngwaọrụ | 1 set | 4 ọnọdụ ntuziaka turret |
Chuck | 2 set | Φ850 igwe eletrik na-agba anọ | |
Ngwaọrụ taper | 1 set | taper ndu mmanya | |
Ebe ezumike etiti | -- | kpakọrịta ma ọ dị mkpa | |
nkwado nkwado azụ | -- | kpakọrịta ma ọ dị mkpa | |
ngwugwu | Ngwungwu mbupụ ọkọlọtọ | 1 set | Ngwongwo ọla na akwa mkpuchi plastik |