Air Compressor
- Cooling the inner surface of the preform without using the high pressure compressed air , unlike most post-mold cooling systems which only cool the outer surface.
- Optimized cycle utilization - being mounted on the moving platen , the cooling system remains active within 85% of the overall cycle-time.
- Capacity of PET injection molding system is from 280 to 500 tonnes ( 2800KN to 5000KN ) , and it is available for the preform mould maximum with 96 cavities.
|
Model |
Flow（m³/min） |
Dimension L*W*H(m) |
|||
|
0.7mpa |
0.8mpa |
1.0mpa |
1.2mpa |
||
|
15kw |
2.5 |
2.3 |
2.1 |
1.8 |
1.45x1.35x1.45 |
|
18.5kw |
3.1 |
2.9 |
2.6 |
2.2 |
1.60x1.35x1.45 |
|
22kw |
3.7 |
3.5 |
3.1 |
2.9 |
1.60x1.35x1.75 |
|
30kw |
5.3 |
5.0 |
4.6 |
3.9 |
1.60x1.35x1.75 |
|
37kw |
6.7 |
6.2 |
5.7 |
5.0 |
1.80x1.55x1.85 |
|
45kw |
7.2 |
7.0 |
6.2 |
5.7 |
1.80x1.55x1.85 |
|
55kw |
10.0 |
9.1 |
8.2 |
7.4 |
2.10x1.80x1.85 |
|
Model |
Flow（m³） |
Power（kw） |
Pressure (Mpa) |
Air tank（m³） |
Dimension L*W*H(m) |
|
0.63/30 |
0.63 |
7.5 |
3.0 |
0.19 |
1.6x0.7x1.35 |
|
1.0/30 |
1.0 |
11 |
3.0 |
0.15 |
1.9x0.9x1.3 |
|
1.2/30 |
1.2 |
15 |
3.0 |
0.15 |
1.9x0.9x1.3 |
|
1.6/30-40 |
1.6 |
18.5 |
3.0/4.0 |
NO |
1.25x1.05x1.7 |
|
2.0/30-40 |
2.0 |
11x2 |
3.0/4.0 |
NO |
2.0x1.65x1.35 |
|
2.4/30 |
2.4 |
15x2 |
3.0 |
NO |
2.0x1.65x1.35 |
|
3.2/30-40 |
3.2 |
18.5x2 |
3.0/4.0 |
NO |
2.7x1.1x2.0 |
|
4.8/30-40 |
4.8 |
18.5x3 |
3.0/4.0 |
NO |
4.0x1.05x1.8 |
|
6.0/30-40 |
6.0 |
22x3 |
3.0/4.0 |
NO |
6.5x1.25x1.65 |
|
6.4/30-40 |
6.4 |
18.5x4 |
3.0/4.0 |
NO |
6.3x1.2x2.0 |
|
Model |
Flow（m³） |
Power（kw） |
Pressure (Mpa) |
Air tank（m³） |
Dimension L*W*H(m) |
|
1.0/10 |
1.0 |
7.5 |
1.0 |
0.19 |
1.8x0.85x0.65 |
|
1.6/10 |
1.6 |
11 |
1.0 |
0.30 |
2.0x1.05x1.9 |
|
2.0/10-12 |
2.0 |
15 |
1.0/1.2 |
0.36 |
2.0x1.05x1.9 |
|
3.0/10-12 |
3.0 |
22 |
1.0/1.2 |
0.45 |
2.1x1.1x1.9 |
|
4.0/10-12 |
4.0 |
15x2 |
1.0/1.2 |
0.48 |
2.3x2.1x1.9 |